Your browser is unable to display the menu. It has been converted to a table at the bottom of this page.

Conventional POP3 clients - LAN
Previous  Top  Next

The POP3 tab allows you to configure SecExMail Gate for operation with mail clients on your local area network. This configuration is recommended where no secure communication between the email client workstation and your mail server is necessary. SecExMail message encryption and decryption takes place on the computer hosting SecExMail Gate. No encryption software of any kind is required on individual email client workstations. Encryption keys are managed centrally on the computer hosting SecExMail Gate by the administrator.


·Enable POP3 Relay  

If checked, this setting enables the POP3 relay service. Message decryption is performed by SecExMail Gate. No software other than a conventional, POP3 capable email client is required on each workstation.  

·SecExGate Port  

SecExMail Gate will listen for client connections on the port you specify here. E-Mail clients should be configured to receive mail via the IP address of the computer hosting SecExMail Gate using this port.  

·POP3 Server Port  

SecExMail Gate will receive e-mail data from your POP3 server on the port you specify using this setting.  

·POP3 Server  

Use this setting to specify the IP address or DNS name of your POP3 e-mail server.  

Bytefusion Software Prices Site Map Purchase This Product On-line
How to Order Secure File Encryption Time Client for Windows
Need an NTP4.0 Time Server for Windows? Secure Shell Client Secure Web Based Email
Secure Email with OpenPGP Support Email encryption for Corporations Need a Telnet Server for Windows?
GPS Sales